The SEER (seasonal energy efficiency ratio) measures the efficiency of your air conditioner or air-source heat pump. The SEER is the cooling output over a particular season divided by the total energy used in that same period. The higher the SEER, the greater the efficiency level of that cooling system.

Each split system cooling unit has a nominal SEER rating. This rating can be increased with the upgrade of the same series indoor unit. The SEER rating of a system is based on the combination of equipment installed in the home. The outdoor equipment (heat pump or air conditioner), as well as the indoor equipment (evaporator coil and furnace, or air handler), play a vital role in the total rating.

Your heating and cooling systems work incredibly hard to perform their functions. The constant stopping, starting and general operation can wear down any machine. Proper care and maintenance help to keep these systems in optimum condition and ward off malfunction. By scheduling regular maintenance, you can maximize the life of your heating and cooling units and guard against many common equipment failures. Preventive maintenance inspections performed in spring for your AC and fall for your heater can uncover leaks, rust, rot, soot, frayed wires, and corroded electrical contacts. Regular maintenance will ensure maximum efficiency and prevent other problems.

All heating and cooling equipment requires an annual professional tune-up. Inspections on boilers and furnaces should include ductwork, pipes, dampers, valves, the chimney, registers, radiators, pumps, blowers, fuel lines, and the oil tank. In our warm climate, we typically do not see many boilers, furnaces, chimneys, or oil tanks – however, it’s important to note that if your home has this equipment you should consider servicing them for preventative maintenance. Heat pump and air conditioning unit inspections should also include an examination of the fan, compressor, indoor coils, outdoor coils, and refrigerant lines.

As your local Carrier dealer, Keith Air Conditioning, Inc. is your troubleshooting expert, and we are happy to help you with any problem you may experience with your HVAC system. In addition, Carrier also provides a network of troubleshooting technicians at Carrier distribution centers across the country which Keith Air Conditioning, Inc. will utilize to solve your concern. Should we encounter a situation that requires additional factory help, we will contact our factory-supported service manager(s) for assistance.

Programmable thermostats are more accurate and efficient than thermostats that contain mercury. With a programmable thermostat, you can program settings in advance so that you can control the temperature at different times of the day. You will never have to worry about remembering to adjust the settings manually.

Standard filters work to keep your system and its ductwork clean, but they can only do so much to improve indoor air quality. A media air cleaner does a much better job of trapping small particles. It rests between the main return duct and the blower cabinet and will improve dust and particle removal up to seven times more effectively than a standard filter. Upgrading to a pleated media filter will remove everything from dust to airborne viruses from the filtered air. Always choose a filter that matches your blower’s capacity. For optimal efficiency and filtration, we recommend that you replace your disposable filters at least once a month. If you have washable filters, you should clean them once a month during periods of heavy use.

Filters for your Carrier unit are made from different or higher-quality materials than those of the disposable filters found in retail stores. For that reason, replacement Carrier filters can only be purchased through a Carrier dealer. However, keep in mind that some Carrier filters are reusable, and can be washed by hand in cold water.

As a Carrier dealer, we are the best resource for the correct, current parts for your system, as well as availability and competitive pricing.

Many factors affect the sizing and specifications of your system, including square footage, insulation, window surface and configuration, geographic location of your home, and duct sizing and arrangement. Keith Air Conditioning, Inc. can perform an in-home load analysis to determine which equipment combinations will perfectly suit your home and your family’s needs. Depending on the construction of your home, one (1) ton of air conditioning can cool anywhere from 300 to 800 square feet. You can ensure that the system you purchase is the right size and not smaller or larger than you require, by having your heating and cooling needs evaluated by a licensed professional.

Under the standard factory warranty, Carrier covers parts that fail during the warranty period due to a defect in the part. The warranty does not cover labor. A warranty certificate was included with your homeowner information packet and is specific to the model numbers, serial numbers, and installation dates of your products. All Carrier equipment that we install is registered with Carrier Corporation to ensure your 10-year parts warranty. If you cannot find your warranty certificate, Keith Air Conditioning, Inc. will also be able to provide you with that information.

Dependable Carrier products are among the longest-lasting heating and cooling products available. For your equipment, many variables affect life expectancy, including, of course, the regularity of routine maintenance.